JBL – CLUB WS1200BLK
Because today’s compact cars offer less space, the JBL Club Subwoofers are designed to fit into small enclosures. They’re slim, sleek, stylish, and don’t sacrifice on sound.
Harman-Proprietary SSITM (Selectable Smart Impedance)
Unlike most dual-voice coil woofers, which provide either 1 or 4 ohms or 2 or 8 ohms, the JBL Club Subwoofers allow the listener to 2-ohm and 4-ohm at the flip of a switch, providing the two most often used impedances from a single woofer. This allows the system designer unparalleled flexibility in extracting every last watt from your amplifier without compromising stability and thermal safety margins.
Frequency Response As Low as to 27Hz
Your audio is filled with delicious sounds. Unfortunately, you’re not always hearing them all. With lows that dig down into the depths of 27Hz, you’ll hear the low-end frequencies you’ve been missing.
OEM-Level Reliability Testing
JBL tests every speaker design to the same rigid specifications as the automakers, subjecting them to extreme conditions that would break lesser speakers. We freeze them, bake them, shake them, blast them with ultraviolet light and drive them at full power for days to make sure your audio investment lasts for years.
|JBL – CLUB WS1200BLK|
|DC Resistance (Ω)||2 & 4 ohm (selectable) (Ω)|
|Peak Power (Watts)||1000W|
|Continuous Power (RMS)||250W|
|Effective Frequency Range||27Hz – 175Hz|
|Surround Material||Butyl Rubber|
|Resonance Frequency (Fs)||22.80/22.82|
|Mechanical Q Factor (Qms)||6.24/3.57|
|Electrical Q Factor (Qes)||0.57/0.64|
|Total Q Factor (Qts)||0.53/0.54|
|Port Information||4″ x 10″|
|Recomended Box Volume Sealed||.75 Cu ft.|
|Recomended Box Volume ported||1.75 Cu ft.|
|Mounting Hole Diameter||11 – 1/8″|
|Top Mount Depth||3 – 3/8″|
|Bottom Mount Depth||3 – 5/16″|
We also sell complete install packages (radios, speakers, etc.) that ensure you get every major component you need to make your purchase and installation as easy as possible. Please feel free to contact Customer Service with any install/package questions at 1-844-30AUDIO, Ext.1, or message us through eBay.
NOTE: We advise that you retain all factory screws or other fasteners when removing the factory speakers as these may be necessary when installing your new aftermarket speakers. Depending upon vehicle configuration, other fasteners may be required.
DISCLAIMER: This fit guide has been researched to the best of our ability with the most current available vehicle information. The information provided is only to be used as an approximate guide.
Different trim levels and/or factory premium audio systems may cause your particular vehicle’s specifications to differ from the specifications offered in this fit guide. Volunteer Audio recommends that you check your vehicle for proper fitment, or consult your professional installer, prior to determining your actual speaker size.
You should also consider the mounting depth, overall diameter, and cut-through diameter of the speakers to ensure that they fit properly without hindering operation of any windows or internal OEM parts.