KICKER – 10C104
KICKER – 10C104 COMP
10″ Comp 4 Ohm SVC
The Comp 10-Inch Subwoofer is a 4Ω speaker, built to give you all the hard-hitting bass you could want in a sub.
This Comp sub features a thick woofer cone and our signature yellow surround stitching, a strong motor structure and perimeter venting to ensure you get the most reliable bass. Paired with a DX amplifier, you get the best combination of value and power.
The Comp 10-Inch Subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power. See below for more details.
|KICKER – 10C104|
|DC Resistance (Ω)||4 ohm (Ω)|
|Peak Power (Watts)||300W|
|Continuous Power (RMS)||150W|
|Effective Frequency Range||30 – 500 Hz|
|Surround Material||Foam Rubber|
|Resonance Frequency (Fs)||33Hz|
|Mechanical Q Factor (Qms)||9.16|
|Electrical Q Factor (Qes)||0.63|
|Total Q Factor (Qts)||0.585|
|Recomended Box Volume Sealed||MIN/1.0 – MAX/2.4|
|Recomended Box Volume ported||MIN/1.25 – MAX/1.75 cu ft|
|Mounting Hole Diameter||9 – 1/8″|
|Top Mount Depth||5 – 1/16″|
|Bottom Mount Depth||N/A|
We also sell complete install packages (radios, speakers, etc.) that ensure you get every major component you need to make your purchase and installation as easy as possible. Please feel free to contact Customer Service with any install/package questions at 1-844-30AUDIO, Ext.1, or message us through eBay.
NOTE: We advise that you retain all factory screws or other fasteners when removing the factory speakers as these may be necessary when installing your new aftermarket speakers. Depending upon vehicle configuration, other fasteners may be required.
DISCLAIMER: This fit guide has been researched to the best of our ability with the most current available vehicle information. The information provided is only to be used as an approximate guide.
Different trim levels and/or factory premium audio systems may cause your particular vehicle’s specifications to differ from the specifications offered in this fit guide. Volunteer Audio recommends that you check your vehicle for proper fitment, or consult your professional installer, prior to determining your actual speaker size.
You should also consider the mounting depth, overall diameter, and cut-through diameter of the speakers to ensure that they fit properly without hindering operation of any windows or internal OEM parts.