Description
Subwoofer Features
Square Matters
The Solo-Baric revolves around KICKER’s most advanced cone design, the injection-molded SoloKon™. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you’ve been looking for.
Features:
•Dual Two-Ohm Voice Coils
•Injection-Molded Polypropylene Cone
•Patented Corner Ribs Minimize Distortion
•SoloKon™ 360-Degree Back Bracing
•Ribbed Santoprene Surround With Blue Surround Stitching
•UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
•Thick Tinsel Leads
•Large Ceramic Magnet
•Cast Aluminum Basket
•Satin-Nickel Plated, Spring-Loaded Speaker Terminals
The Solo-Baric L7S 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power.
Subwoofer Specifications
| SUBWOOFER SPECIFICATIONS | |||||
|---|---|---|---|---|---|
| Kicker 44L7S122 Subwoofer | |||||
| GENERAL | |||||
| SIZE | 12 | ||||
| Voice Coil | Dual | ||||
| DC Resistance (Ω) | 2 ohm (Ω) | ||||
| Peak Power (Watts) | 750W | ||||
| Continuous Power (RMS) | 750W | ||||
| Sensitivity | 86.90dB | ||||
| Effective Frequency Range | 20 – 500 Hz | ||||
| Cone Material | IMPP | ||||
| Surround Material | Foam Rubber | ||||
| X-MAX | 9.6MM | ||||
| Thiele/Small Parameters | |||||
| Resonance Frequency (Fs) | 34Hz | ||||
| Mechanical Q Factor (Qms) | 9.488 | ||||
| Electrical Q Factor (Qes) | 0.571 | ||||
| Total Q Factor (Qts) | 0.539 | ||||
| BOX INFORMATION | |||||
| Port Information | N/A | ||||
| Free Air | Yes | ||||
| Recomended Box Volume Sealed | MIN/1.25 – MAX/2 cu ft | ||||
| Recomended Box Volume ported | MIN/1.75 – MAX/3.25 cu ft | ||||
| MOUNTING INFORMATION | |||||
| Mounting Hole Diameter | 11-1/16″ | ||||
| Top Mount Depth | 6 – 13/16″ | ||||
| Bottom Mount Depth | N/A | ||||
| Weight | 24.3625 | ||||
| Grille | No | ||||
| Warranty | 1 Year | ||||
