Precision Power Stage 4 Plug & Play Amp and Speaker Package For 2014-2020 Harley Davidson® CVO Road Glide with Boom 2 & Factory Radio

Starting at $1,723.37

Sku:HDPKG2322
  • 4-Speaker Factory Replacement For Harley Davidson® CVO
  • Prewired amp so all you have to do it connect power and ground to battery and connect remote wire. All other wiring is complete.
  • Your factory radio has to be flashed using the Technoresearch programming tool – which we offer for rent separately!
  • More Features!

Select Amplifier Select Amplifier

Precision Power MAA4.400 Class D 4 Channel Mini Digital Amplifier
  • Gains and all settings come preset from us for your radio
  • Optional Variable 12dB/Octave High-Pass Crossovers
  • For Harley Davidson® CVO Road Glides with Boom 2 & Factory Radio
  • More Features!
$872.99

20 in stock

Do you need a Radio Flash Tool? Do you need a Radio Flash Tool?

When adding an amplifier to your factory radio flashing the radio is REQUIRED.
All amps from Volunteer Audio are tuned for a specific flash.
*This flash attenuates the radio out down to usable input for aftermarket amp.
*Turns on rear speaker outputs,
*Flattens eq settings removing factory bass boost that causes distortion.
*Changes eq settings so the audio sounds the same no matter if the engine is running or just ignition power on

$0.00

20 in stock

Precision Power MAS.652HT 6.5” Upper Fairing Speakers Precision Power MAS.652HT 6.5” Upper Fairing Speakers

  • 150w RMS Power Handling
  • Polypropylene Coated Paper Cone is Mechanically Rugged, Water, & Thermally Resistant
  • Low Mass Neodymium Rare Earth Element Magnets for Maximum Outputs
  • More Features!
$379.00

20 in stock

Precision Power MAS.692HT 6x9” Lid Speakers Precision Power MAS.692HT 6x9” Lid Speakers

Precision Power MAS.692HT 6x9” Speakers + Metra Saddlebag Lid Cover
  • Works with Saddle Tramp or OEM saddlebag lids
  • 200w RMS Power Handling
  • Protective Water-Resistant Nylon
  • More Features!
$529.99

20 in stock

Select 6X9 Speaker Adapters Select 6X9 Speaker Adapters

5X7 To 6X9 Speaker Adapter Set For Lids 2014-2022 Harley Davidson® WITHOUT Electric Lid Locks
  • Waterproof and air tight
  • Built for larger, high-performance speakers
  • American-made stainless steel and aluminum hardware
  • More Features!
$179.99

20 in stock

Speaker Polarity Tester Speaker Polarity Tester

  • A microphone at the top of the tester will pick up the test tone
  • LED indicators for +Polarity and -Polarity will light to indicate if the speaker polarity is in-phase or out-of-phase
  • powered by a 9V battery (NOT INCLUDED) and features a Low Battery LED indicator
  • More Features!
$16.99

20 in stock

Do you want to add Sound Deadening? Do you want to add Sound Deadening?

SoundSkins sound deadening can be added to:
Fairing, Saddlebag Lids and or Saddlebags
Used to reduce vibrations and improves audio output

$0.00

20 in stock

Do you want to upgrade your battery? Do you want to upgrade your battery?

Not required with our systems but if you want 
a more powerful longer lasting battery we have 
great options.

$0.00

20 in stock

$2,074.95 $2,003.96

20 in stock

-

Description

**MAS.652HT Speakers are not waterproof!**

Can you hear your factory Harley speakers loud and clear at highway speeds?

We didn’t think so…

Are you tired of blowing those factory speakers trying to be able to hear them?

Of course you are!

These issues are something we hear ALL the time at Volunteer Audio, so we are here to give you a sound experience you will be blown away with! This package will allow you to keep your factory radio when upgrading your sound system, but it will require a flash in order to get the full potential out of your amplifier and speakers so your music will be loud and clear up to 100 mph!

Can I really hear rear speakers when I add them to my bike? We get this question ALL the time at Volunteer Audio, so we want to answer the question once and for all…YES of course you can hear the rear speakers when they are added. When you purchase from Volunteer Audio we do several things to make sure you can hear your rear speakers:

  • When installing 6×9” we use cut in kits which position the speaker higher in the lid which takes up less room in your bag and also angles the speaker toward you so you can hear the speaker better. Most replacement lids do not do these things.
  • We properly power the rear speakers so they are loud enough to hear even when they are behind you.
  • When using a factory radio after flashing the radio you will lose fader, we take that into account and fade our amplifier settings slightly to the rear.

We know that the rear speakers won’t overpower the front speakers because the front speakers are pointing directly at you, of course they will be louder, but the rear speakers give you a more full sound that surrounds you. Which gives you a concert feeling and also gives added mid-bass.

This Volunteer Audio Stage 4 amplifier and speaker package includes your choice of a perfectly paired prewired amplifier with 1 pair of front speakers, 1 pair of rear speakers, and all required wiring needed to add to your bike without modifying any factory wiring in your bike.

This package includes:

  • Your choice of a prewired amplifier with gains and filters adjusted perfectly for your factory GT / GTS radio
  • 1 pair of Precision Power MAS.652HT 6.5” upper fairing speakers
  • 1 pair of Precision Power MAS.692HT 6×9” saddlebag lid speakers
  • Backbone and saddlebag quick disconnect wiring harnesses for rear speakers
  • Optional parts for this system include: upper fairing speaker grilles, Techno Research radio flash tool, Sound Skins Sound deadening, and Battery

At Volunteer Audio we work hard so you don’t have to. We make it easy for you to add an amazing sound system to your bike by completing all the prep work here. When we send this kit to you it is as close to finished as we can possibly get it so you just have to install it. We will have all the gains and filters set on the amplifier so you do not have to know how to set the adjustments. All you will have to do is mount the amplifier with provided mounting hardware, run the provided wiring to under the seat and to battery and then install the speakers. We have step by step videos showing how to complete each step of this process and also offer lifetime tech support on items purchased from us.

This Stage 4 kit is next step to your dream audio system for your Harley. We also have Stage 6 and Stage 8 audio packages! Whether you would like to enjoy music while out riding through the country or compete in sound competitions we have the package that is just for you!

We do offer a loaner tool program so that you can flash your radio or if you want to see if there is a dealer to flash your radio near you, click this link: Techno Research

Let’s talk CVO Boom systems

We know…you upgraded to the Boom Stage 2 system and are still disappointed. While sitting still your music sounded great but turn on the engine and all you get is distortion. You spent a lot of money and didn’t get nearly the sound you thought you would have. We hear this ALL the time at Volunteer Audio, so we have partnered with Infinity to give you a sound experience you will be blown away with! This package will allow you to keep your factory radio when upgrading your Boom sound system, but it will require a flash in order to get the full sound potential out of your amplifier and speakers so your music will be loud and clear up to 100 mph!

There are a couple different CVO Boom systems that are available. Let’s talk about how to tell which Boom system you have.

Boom Stage 1 – Comes mostly on bikes with factory tour pack speakers, you will have a total of 4 speakers and 1 amplifier. You will also be able to tell by the speakers only having one positive and one negative connection. Having Boom Stage 1 you can change only the amplifier and leave the factory speakers.

Boom Stage 2 – Comes mostly on bikes with factory saddlebag speakers, there will normally be a total of 6 speakers (uppers, lowers and saddlebag) with 3 amplifiers or 4 speakers (uppers and saddlebag) with 2 amplifiers. Each speaker will also have a total of 4 connections; the tweeter and the woofer are both wired to the amplifiers with separate connections. Having Boom Stage 2 you will have to change the amplifier and the speakers at the same time.

Vehicle Information

• 2015-2020 Harley-Davidson Road Glide