Description
SPV-65X-WRA: Optimized for your Jeep
Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2″ speaker system that allows you to configure the included woofers and tweeters separately or as coaxials, depending on where you need to install them. Included factory wiring harnesses will also make installation go smoother.
As components
Alpine gives you several options for mounting the component 1″ Teteron dome tweeters, including brackets to use your JK’s tombstone-style locations if you have them. Inline crossovers make installation tidier as well.
As coaxials
If you have rear locations that don’t make a component configuration feasible, use Alpine’s included brackets to mount the tweeters onto the woofers in a coaxial design.
Weather resistant
Metra JP-1014: Great Car, Small Speakers
The new Jeep Wrangler and Jeep Gladiator are awe-inspring vehicles, but it’s tough to put together a great sound system with their small stock speakers. Metra comes to the rescue with their JP-1014 speaker pods. These custom-fit enclosures install in your Jeep’s knee panel locations, so you can replace the stock 4″ speakers with larger 6-1/2″ and 6-3/4″ speakers. You’ll get more bass and more volume, for even more fun in your Jeep.
Enclosures and harnesses
You’ll get one ABS enclosure for the driver’s side and one for the passenger’s side — and each sealed enclosure includes a hole for the factory wiring grommet. The package also includes Jeep speaker adapters so you don’t have to cut off the plugs that attach to the factory speakers. The enclosures accept any 6-1/2″ or 6-3/4″ speakers with a mounting depth of 4″ or less, including speakers with the Chrysler 3-hole mounting pattern.
Installation Note
Dash disassembly on the driver’s side is very difficult. We recommend consulting a professional installer if you don’t have experience with this type of project.
JP-1014 Product Highlights:
- install new speakers in 2018-up Jeep Wrangler (JL) and 2020 Jeep Gladiator
- replaces the 4″ speaker in the factory knee panel speaker locations
- accepts any 6-1/2″ or 6-3/4″ speaker (up to 4″ deep)
- package includes two enclosures and Jeep speaker adapter plugs (speakers not included)
- warranty: 1 year
- MFR # JP-1014
SPV-65X-WRA Product Highlights:
- designed to fit in select Jeep JK vehicles
- vehicle-specific component/coaxial speaker system
- two 6-1/2″ woofers
- two 1″ Teteron dome tweeter with inline crossover
- tweeters can be mounted separately or coaxially
- vehicle-specific installation gear and wiring adapters included
- handles up to 75 watts RMS (225 watts peak)
- frequency response: 65-22,000 Hz
- impedance: 4 ohms
- warranty: 1 year
- MFR # SPV-65X-WRA
What’s in the box:
- One Driver’s side speaker enclosure
- One Passenger side speaker enclosure
- Two 72-6514 OEM speaker harnesses
- Installation instructions
- 2 Woofers
- 2 Tweeters (with 5″ wire attached)
- 2 Tweeter crossovers (in-line)
- 2 Polyfill sheets
- 2 Tweeter mounting plates
- 2 Bridge mount brackets
- 2 Bridge mount wire covers
- 2 Foam strips (0.25″ x 0.625″)
- 2 Alpine logo badges
- Warranty information
- On-line product registration information
- Important Notice sheet
- Installation instructions
- Specifications on box
Sku:HDPKG1187
Vehicle Information
• 2018-2022 Jeep Wrangler :
• 2020-2022 Jeep Gladiator :