Hertz Stage 4 Plug & Play Amp And Speaker Package With SoundStream Reserve WHD.SG Radio For 1998-2013 Harley Davidson® CVO Street Glide And Ultra With A Factory MTX Amp

Starting at $2,579.90

Sku:HDPKG2904
  • For Street Glides that have a factory MTX Amplifier
  • Prewired amp so all you have to do is connect power and ground to battery and connect remote wire. All other wiring is complete.
  • For 1998-2013 Harley Davidson®
  • More Features!

SoundStream Reserve WHD.SG Radio SoundStream Reserve WHD.SG Radio

SoundStream Reserve WHD.SG Plug & Play Upgrade Headunit for 1998-2013 Harley Davidson® Street Glide. Electra Glide, & Ultras Only
  • 7" Bright QLCD Capacitive Touchscreen
  • 5-Volt RCA Audio Outputs
  • Brighter LED Indicator Lights Visible Thru Reflections
  • More Features!
$899.00

20 in stock

Select Amplifier Select Amplifier

1000W RMS , Class D 2-3-4 channel amplifier
  • Plug-&-Play Kit For Harley-Davidson Street, Electra, Ultra Glides with SoundStream Radio
  • Prewired for factory radio harness, also includes power and ground to battery connected to amp
  • SoundStream Radio Retains Thumb Controls
  • More Features!
$799.99

20 in stock

Amplifier Bypass Harness Amplifier Bypass Harness

  • Front Amp Bypass all CVO 2011-2013
  • Saddlebag amp bypass CVO
  • Harley Davidson® FLH 2011-2013, FLT 2011-2013
  • More Features!
$69.00

20 in stock

Hertz SX165NEO 6.5” Upper Fairing Speakers Hertz SX165NEO 6.5” Upper Fairing Speakers

6-1/2 Inch (6.5) Full-Range Coaxial Speaker
  • Water Repellent Pressed Paper cone with a Rubber Surround
  • 1-7/16" PEI Dome Tweeter
  • Maximum Power - 200W, RMS Wattage - 100W, Impedance - 4 Ohm
  • More Features!
$359.99

20 in stock

Select Upper Fairing Speaker Grilles Select Upper Fairing Speaker Grilles

  • Upper Fairing Grill for 1998-2013 Street Glide or Ultra
  • Works for CVOs
  • Fits 6.5" Speakers with adapter
  • More Features!
$60.00

20 in stock

Metra 82-9601 Speaker Adapters Metra 82-9601 Speaker Adapters

Motorcycle Speaker Adapter
  • Designed For Installation Of 6.5-6.75" Aftermarket Speakers
  • Sold As A Pair
  • 1 Year Warranty
  • More Features!
$34.95

20 in stock

Hertz SX690NEO 6x9” Lid Speakers Hertz SX690NEO 6x9” Lid Speakers

6X9 Inch Full-Range Coaxial Speaker
  • Water Repellent Pressed Paper cone with a Rubber Surround
  • 1-7/16" Tetolon Dome Tweeter
  • Maximum Power - 260W, RMS Wattage - 130W, Impedance - 4 Ohm
  • More Features!
$439.99

20 in stock

Do you have factory 5x7 lids? Do you have factory 5x7 lids?

Speaker Polarity Tester Speaker Polarity Tester

  • A microphone at the top of the tester will pick up the test tone
  • LED indicators for +Polarity and -Polarity will light to indicate if the speaker polarity is in-phase or out-of-phase
  • powered by a 9V battery (NOT INCLUDED) and features a Low Battery LED indicator
  • More Features!
$16.99

20 in stock

$3,094.91 $2,679.91

  • Do you have factory 5x7 lids? Please choose an option.

20 in stock

Starting at $50/mo or 0% APR with . Check your purchasing power

Description

Can you hear your factory Harley speakers loud and clear at highway speeds?

We didn’t think so…

Are you tired of blowing those factory speakers trying to be able to hear them?

Of course you are!

These issues are something we hear ALL the time at Volunteer Audio, so we are here to give you a sound experience you will be blown away with! This package will allow you to keep your factory radio when upgrading your sound system, but it will require a flash in order to get the full potential out of your amplifier and speakers so your music will be loud and clear up to 100 mph!

Can I really hear rear speakers when I add them to my bike? We get this question ALL the time at Volunteer Audio, so we want to answer the question once and for all…YES of course you can hear the rear speakers when they are added. When you purchase from Volunteer Audio we do several things to make sure you can hear your rear speakers:

  • When installing 6×9” we use cut in kits which position the speaker higher in the lid which takes up less room in your bag and also angles the speaker toward you so you can hear the speaker better. Most replacement lids do not do these things.
  • We properly power the rear speakers so they are loud enough to hear even when they are behind you.
  • When using a factory radio after flashing the radio you will lose fader, we take that into account and fade our amplifier settings slightly to the rear.

We know that the rear speakers won’t overpower the front speakers because the front speakers are pointing directly at you, of course they will be louder, but the rear speakers give you a more full sound that surrounds you. Which gives you a concert feeling and also gives added mid-bass.

This Volunteer Audio Stage 4 amplifier and speaker system includes your choice of a perfectly paired prewired amplifier, 1 pair of upper fairing speakers and 1 pair of 6×9 speakers. This combination is a perfect match for the environment of your Harley Davidson. The amplifier is a compact amplifier that is IP64 rated so you do not have to worry about moisture, the Hertz speakers also have weather-resistant cones that will stand up to any moisture that comes their way.

This package includes:

  • SoundStream Reserve WHD.SG Radio with Thumb Control Module
  • Your choice of a prewired amplifier with gains and filters adjusted perfectly for your factory GT /GTS radio
  • 1 pair of Hertz SX165NEO 6.5” upper fairing speakers
  • 1 pair of Hertz SX690NEO 6×9” saddlebag lid speakers
  • Metra 82-9601 Speaker Adapters
  • Speaker cut in kit for lids includes template, grilles and brackets to hold 6×9” speakers
  • Optional parts for this system include: upper fairing speaker grilles 

At Volunteer Audio we work hard so you don’t have to. We make it easy for you to add an amazing sound system to your bike by completing all the prep work here. When we send this kit to you it is as close to finished as we can possibly get it so you just have to install it. We will have all the gains and filters set on the amplifier so you do not have to know how to set the adjustments. All you will have to do is mount the amplifier with provided mounting hardware, run the provided wiring to under the seat and to battery and then install the speakers. We have step by step videos showing how to complete each step of this process and also offer lifetime tech support on items purchased from us.

This Stage 4 kit is next step to your dream audio system for your Harley. We also have Stage 2, Stage 6, Stage 8 and even Stage 10 speaker packages! Whether you would like to enjoy music while out riding through the country or compete in sound competitions we have the package that is just for you!

SoundStream Reserve WHD.SG

Upgrade for 1998-2013 Harley-Davidson® Street Glide

Retains OEM Mounting Hardware, No Brackets or Trim Panel Required

Retains OEM AM/FM Radio Antenna, No Antenna Adapters Required

USB® Cable Included, 21” Long to Install on Either Side of Fairing

Handlebar Controls Built-in, No Handlebar Control Module Required

IPx5 Water-Resistant Faceplate, Safe for All Weather & Washing

7” Bright QLCD w/ Capacitive Touch Screen & RGB Illumination

Wireless CarPlay® with Siri Eyes Free for Apple iPhones

Wireless Android Auto® w/ Google Assistant for Android Phones

SiriusXM® Ready® (separate vehicle connect tuner required)

Bluetooth® Wireless Connectivity for Audio Playback & Control

Video Camera RCA Input w/ 12v Trigger & On-Screen Shortcut

200w 4-Channel Amplifier Built-in, Class A/B & 2-Ohm Stable

5-Volt RCA Audio Outputs for Front, Rear, & Subwoofer Amplifiers

13-band Digital Equalizer w/ Preset & Custom Settings Built-in

High Pass Crossover for Front/Rear Speaker & RCA Outputs

Low Pass & Subsonic Crossover Subwoofer RCA Output

LED Indicator Lights Built Into the Front Panel, Uses OEM Connector

Phantom Buttons on Faceplate

U.S. Patent Pending

Vehicle Information

  • 1998-2013 Harley-Davidson CVO Street Glide
  • 1998-2013 Harley-Davidson CVO Ultra