Description
- Class D 2-Channel Power Amplifier
- 80W x 2 @ 2 ohms (RMS)
- No Radio Flash Required
- Bypass Port For System Expansion
- Plug & Play Power, Speaker, & Input Wiring
- Speaker Level Input For HD OEM Radio or Any Aftermarket Receiver
- Input Sensitivity Adjustment
- High Efficiency Design Will Not Overload HD Electrical Systems
- 2-Year Warranty
No Radio Flash Required
This amplifier is tuned for the best performance with a stock Harley Davidson® or aftermarket radio.
Input Sensitivity Setting
The input sensitivity adjustment exists to be able to properly level match an aftermarket receiver’s output if the OEM Harley Davidson® radio has been replaced (otherwise, we would have just removed and pre-set it!).
With an OEM Harley Davidson® radio, the input sensitivity should be set at just past the halfway point for optimal sound as shown in the picture above.
**Note** With this setting, the OEM Harley Davidson® radio can be turned up to 3 “clicks” from its max volume before the radio begins to distort.
Bypass Port For System Expansion
Easily add additional amplifiers by connecting to the input/bypass harness.
Built-in Voltage Monitoring Circuit
Automatically turns off the amplifier when the battery
voltage drops below 10.5V