Description
Subwoofer Features
Kicker L7S84 Square 4 Ohm 8″ Solo-Baric Subwoofer
The KICKER® Solo-Baric® L7S™ is based on the groundbreaking original square subwoofer. Massive power handling and more cone area means you move more air, and get more bass.
GRACE UNDER PRESSURE
The patented ribbed corners on the Solo-Baric L7 Santoprene™ surrounds are constantly defeating distortion while adding control to make your bass loud AND clear – even with thousands of watts pumping through them.
SOLO STRENGTH
KICKER’s most advanced cone design, the injection-molded SoloKon™ adds 360-degree, constant-contact back bracing for a woofer that’s stronger, more reliable and incredible responsive.
TAKE THE HEAT
The cooler a sub is, the longer it’ll play. KICKER’s UniPlate™ back plate and pole piece are a single, solid unit, which allows heat to move away from the motor. Venting below the spider allows even more air to move, and heat to escape. Your subs play as cool, as your music keeps bumping!
MATERIAL WITNESS
Choosing the right materials makes all the difference. Heavy duty tinsel. A thick, semi-progressive spider. Dual high-temperature voice coils. Ceramic magnets. A forged aluminum frame. All this technology comes together to get the juice exactly where it needs to go. From your amps, right to your ears!
Subwoofer Specifications
SUBWOOFER SPECIFICATIONS | |||||
---|---|---|---|---|---|
Kicker 44L7S84 Subwoofer | |||||
GENERAL | |||||
SIZE | 8 | ||||
Voice Coil | Dual | ||||
DC Resistance (Ω) | 4 ohm (Ω) | ||||
Peak Power (Watts) | 450W | ||||
Continuous Power (RMS) | 450W | ||||
Sensitivity | 82.37dB | ||||
Effective Frequency Range | 28 – 500 Hz | ||||
Cone Material | IMPP | ||||
Surround Material | Foam Rubber | ||||
X-MAX | 9.6MM | ||||
Thiele/Small Parameters | |||||
Resonance Frequency (Fs) | 47.2Hz | ||||
Mechanical Q Factor (Qms) | 8.828 | ||||
Electrical Q Factor (Qes) | 0.802 | ||||
Total Q Factor (Qts) | 0.735 | ||||
BOX INFORMATION | |||||
Port Information | N/A | ||||
Free Air | Yes | ||||
Recomended Box Volume Sealed | MIN/.5 – MAX/.75 cu ft | ||||
Recomended Box Volume ported | MIN/.66- MAX/1 cu ft | ||||
MOUNTING INFORMATION | |||||
Mounting Hole Diameter | 7-1/4″ | ||||
Top Mount Depth | 4 – 3/4″ | ||||
Bottom Mount Depth | N/A | ||||
Weight | 14.16875 | ||||
Grille | No | ||||
Warranty | 1 Year |