SONY – XAV-V631BT
Stream music from your smartphone and make hands-free calls.
Music sounds clear and natural at any volume with 4 x 55 W amplification and EXTRABASS. 2
Turn your receiver into a touch-screen navigation system by connecting our optional plug-in module kit. 3
Stream Music in Seconds
Tap the back of your NFC-enabled phone to the receiver’s volume knob for a one-touch wireless connection. Alternatively, use your mobile’s settings to quickly create a Bluetooth link.
Voice Control with SongPal
A handy voice-controlled app, SongPal manages media playback and can even read your emails or help with navigation.
Voice Control with Siri
Want to control your iOS mobile or tablet without taking your attention off the road? Siri Eyes Free manages music playback, helps with navigation, reads out your messages, and more. 4
USB and AUX inputs
No Bluetooth? No problem. Just plug your mobile, memory device or MP3 player into the USB socket to access all your songs. Alternatively, use a cable to connect your music player’s headphone-out socket to the receiver’s AUX input.
4 x 55 W output for clear sound whatever the volume
Advanced amplification from the 4 x 55 W Dynamic Reality Amp 2 minimizes interference, so music sounds clear and detailed.
EXTRABASS and EQ5 Advanced
With two different boost modes, EXTRABASS adds deep low frequencies to your tracks. Plus EQ5 Advanced lets you adjust frequency as you like.
3 Pre-out means more speaker options
Want to build a full in-car audio system? Connect additional amplifiers for your speakers and sub-woofers for even greater volume and dynamics.
Smart Touch Screen
Control everything easily with large touch-screen buttons. Customize the interface to match your car interior by choosing from five color schemes.
Rear Camera Ready
Got a rear camera installed? Whenever you put your car in reverse or tap the camera icon button, you’ll see the video feed clearly on screen. Use the movable guide lines on screen to back in easily.
|Stereo Separation||30 db|
|Usable Sensitivity||44 UV|
|Seek / Scan||Seek|
|Maximum Communication range||Line of Sight|
|Profile||A2DP, AVRCP, HFP, OPP, PBAP, SPP|
|Steering Wheel Controls Compatible||Adapter Required|
|Maximum Supply current||1A (DC5V)|
|iPod Compatibility||Full size||Yes|
|Satellite Radio Ready||No|
|Memory Card Slot||No|
|Reverse Camera Input||No|
|AMP / PREAMP|
|AMP||RMS Power||17W X 4|
|Maximum Power||55W X 4|
|Speaker Impedance (Ω)||4 – 8 Ohms (Ω)|
|Preamp Outputs||Number of Channels||}|
|Preamp Voltage||2 Volt|
|Sub Preamp Outputs||2 Volt, 6 Channel|
|Switchable Rear Preamp Outputs||No|
|Faceplate Design||Key Button Color||White|
|Number of Color Zones||}|
|GENERAL||Operating voltage||12 – 14.4v|
|Maximum Current Consumption||10A|
NOTE: We advise that you retain all factory screws or other fasteners when removing the factory radio. They may be necessary when installing your new aftermarket radio. Depending upon vehicle configuration, other fasteners or installation parts may be required.
We also sell complete install packages (radios, speakers, etc.) that ensure you get every major component you need to make your purchase and installation as easy as possible. Please feel free to contact Customer Service with any install/package questions at 1-844-30AUDIO, Ext.1.