Volunteer Audio

Kicker – 44KXMA4002

$399.95

2 Channel Amp
  • Maximum Power with 100W RMS
  • Preamp Outputs and Speaker Level Inputs
  • Class D amp technology
  • More Features!

5 in stock

Description

Product Description

Kicker 44KXMA4002

 

AMPLIFIER FEATURES

Enjoy your music while you’re cruising

A little power goes a long way in making your day out on the water more fun. Kicker’s KMA300.4 marine amplifier can power four speakers with 40 watts RMS each, so you’ll hear your music clearly over the sounds of the wind and waves, in up to 2 zones on your boat. You could also use this amp to power a system consisting of two speakers and a subwoofer. If you’re just interested in power, this amp can go into bridged, 2-channel mode and put out up to 150 watts RMS per channel, for a couple high-performance tower speakers, for example.

Tone controls for the best sound

High-pass crossover filters guard against low-frequency distortion in your speakers. A low-pass filter and a bass boost on each channel help sculpt the tone when you’re powering subs.

Shrugs off salt and water

Kicker knows how rough things can get at sea — they built this amp weather-tough, with marine-grade speaker terminals, stainless-steel screws, conformal circuit boards, and ABYC/NMMA-compliant power connections. That last one is a certification from the National Marine Manufacturers Association (NMMA), so you know that these connectors are well-made and will work well for a long time, even in rough seas.

Amplifier Specifications

AMPLIFIER SPECIFICATIONS

Kicker 44KXMA4002

FEATURES
Amplifier Class D
CEA-2006 Compliant Yes
Crossover Low-Pass Crossover Frequency 40-5000 Hz
Low-Pass Slope (dB/octave) 24 dB/Octave
High-Pass Crossover Frequency 10-500 Hz
High-Pass Slope (dB/octave) 24 dB/Octave
Cooling System Heat Sink
Fuse Rating 60
Speaker Level Inputs Yes
Preamp Outputs Yes
Dimensions (L X W X H) 8-5/16″ X 2-1/8″
Compatable Wiring Kits
Warranty 2 Year
POWER RATINGS
POWER OUTPUT RMS Power Output
(Watts x Channels)
100W
Peak Power Output
(Watts x Channels)
Bridged Power
(Watts x Channels)
400 X 1
Minimum Impedance Bridged 4 Ohm
Unbridged 2 Ohm
Signal To Noise (S/N) 75 dB
THD at Rated RMS Power 1%
Frequency Response 20-20k Hz
Input Voltage 14.4V (10V-16V)
Wire Input Gauge 8

Additional information

Weight 6.03 lbs
Dimensions 15.50 × 4.50 × 11.00 in
Brand

Kicker

Type

2 Channel Amp

1