K40 takes your safety seriously.

For the first time, you can control your portable radar and laser detector with a convenient handheld remote control or professionally installed expert controller. This innovation allows you to customize and control your radar detector while keeping your eyes on the road.

K40’s Platinum100 portable radar and laser detector is also ready to connect to your professionally installed Laser Defusers, giving you the confidence of proper protection from laser speeding tickets and audible and visual alerts through your Platinum100. Hence, you know exactly when you are being targeted by and jamming police laser.

Features designed with you and your vehicle in mind.

The Platinum100 gives you the ultimate portable speeding ticket protection and puts you in control of where and when you hear police radar and laser alerts. With K40, you’re ready to drive right out of the box.

Optional Wireless or Hardwired Remote Control

The Platinum100 is the first portable radar detector built with your safety in mind. You now have the option to control your Platinum100 with a remote control. You can purchase the Platinum100 with or without a hand-held remote control or special order a hardwired, back-lit, Expert remote control option and have your retailer custom install it into your vehicle. Directional Awareness

The Latest Technology for Long Range Protection – The Platinum100 includes engineering enhancements that inspire confidence to drive with today’s best speeding ticket protection.

New LNA (Low Noise Amplifier) radar receiver technology increases range and sensitivity.
A more powerful CPU for a more responsive system and greater customization options.
USB is updateable for future expansion.

GPS Features

The Platinum100 offers you fully customizable GPS technology features such as:

Mark to Mute – Mute audible warnings of false, non-police radar locations you regularly travel past with a simple push of the MARK button on your Platinum100.
Mark to Alert – Mark locations to alert, such as dangerous intersections, speed traps, school zones, and red-light cameras, by pressing and holding the MARK button on your Platinum100.
Speed Monitor – Track your speed without taking your eyes off the road and be alerted if you exceed your pre-selected speed.
Quiet Ride – Mute all alerts under a pre-selected speed. Eliminates alerts when you are driving at or near the posted speed limit (Default setting is 20 mph).
Auto Filter – Sensitivity automatically adjusts to the optimum setting based on your vehicle’s speed. This “set it and forget it” option means you always have just the right amount of protection. Less sensitivity at lower speeds means fewer false alerts; increased sensitivity at higher speeds means more time to slow down and avoid that ticket.

Advanced Filtering

The Platinum100 is packed with advanced filtering technology, making it the quietest and most dependable radar and laser defense system available today.

K-Band Filter – Automatically rejects false alerts from radar-based safety features like Collision Avoidance and Lane Departure Warnings from other vehicles (including your own).
Traffic Sensor Filter – Rejects alerts from traffic flow sensors usually encountered during highway driving.
Ka-Band Filter – Enables filtration of non-police Ka-Band radar signals, e.g., other radar detectors and satellite broadcast bands.

Radar Band Selectivity

The Platinum100 allows you to choose specific band frequency ranges you wish to be alerted to. Make the drive quieter by honing in on specific frequency ranges used only by a police officer’s radar gun.

K-Band Narrow/Wide/Extended – Allows you to customize the frequency range of K-Band radar signals your system scans and alerts for.
Ka-Band Narrow/Wide – Allows you to customize the frequency range of Ka-Band radar signals your system scans and alerts for.

Optional K40 Laser Defuser® Protection

Become invisible to police laser guns. The Platinum100, combined with the combat power of Laser Defuser transponders, delivers the ultimate in bumper-to-bumper speeding ticket protection.

Detects and alerts to every FCC approved North American police radar frequencies.

Product highlights:

radar/laser detector featuring GPS protection
wireless remote control
suction-cup windshield mount, coiled power cord, straight power cord, and extra fuses
headphone jack
mini-USB input
multi-color OLED display

Protection:

detects all X, K, and Ka police radar bands, plus MRCD/CT
laser detection
low-noise amplifier (LNA) receiver boosts signal for long-range warning
digital voice and audio tone alerts for radar, laser, and MRCD/CT
Traffic Sensor Filter rejects alerts from roadside traffic flow sensors
sensitivity modes: Highway, City, and AutoCity (speed-based)
K-Band Filter (KBF) rejects alerts from radar based safety features like collision avoidance and adaptive cruise control
filtration modes: Highway, City, Filter, Auto-Filter (speed-based)
RDD Guard provides protection from radar detector detection (RDD)
25 programmable features
Mute, Extended Mute, and Auto Volume options
All Threat Mode

GPS Features:

Mark to Mute silences false stationary alerts
Mark to Alert for specific GPS locations like red-light cameras
Quiet Ride silences alerts until you exceed a selected speed
Speed Monitor over-speed alert
AutoFilter automatically adjusts sensitivity based on vehicle speed.
speed, clock, and compass display

What's in the box:

K40 Platinum100 owner's manual

Radar/laser detector
9.5' Straight power cord with vehicle power adapter
3.5' Coiled power cord
Two 2A Spare fuses
Windshield mount with 2.5" suction cup
Remote control
CR2032 Lithium battery (installed in remote)
Owner's Manual
Warranty Registration for Ticket-Free Driving

Overview: The K40 Platinum100 is the first portable radar/laser detector that comes with a wireless remote control. You can choose whether to control your detector with the top-mounted buttons, or with the included remote control. The Platinum100 comes with two power cords -- one coiled and one straight -- and a strong suction cup windshield mount.

Radar/Laser Detection: The Platinum100 can detect the following radar bands and frequencies:

X-band: 10.500-10.550 GHz
K-band: 23.950-24.285 GHz
Ka-band: 33.400-36.000 GHz
Laser: 830-945 nanometers

Radar Band Selectivity: The Platinum100 lets you choose specific band frequency ranges in the K- and Ka-bands. Selecting the specific frequency ranges used only by law enforcement helps to reduce false alerts and making your drive quieter. The selections are as follows:

K-Band Selectivity:
- K Wide: This default setting scans the standard range of K-Band frequencies that police radar guns can use. (scans 24.026 - 24.285 GHz)
- K Narrow: This setting scans only the primary frequencies used by police radar guns. (scans 24.080 - 24.200 GHz)
- K Extended: This setting extends the scan above and below the standard range of frequencies used by police radar guns now and in the future. (scans 23.950 - 24.285 GHz)
Ka-Band Selectivity:
- Ka Wide: Ka Wide is the default setting that scans the entire range of Ka-Band frequencies that police radar guns can use. (scans 33.4 - 36.0 GHz)
- Ka Narrow: Ka Narrow scans only the primary frequencies in the Ka-Band used by police for speed enforcement. (scans 33.7 - 33.9 GHz, 34.6 - 34.8 GHz, and 35.4 - 35.6 GHz)

MultaRadar Photo Radar: The Platinum100 can alert you to the presence of MRCD/CT photo radar device in limited use areas. You can enable MRCD/CT photo radar detection in the menu, when needed. An MRCD/CT Filter can be turned on to reduce false alerts when MRCD/CT detection is enabled.

Optional Laser Defusers: Optional K40 Laser Defusers help you to become invisible to police laser guns. Laser Defusers are professionally installed around your vehicle, and up to 5 Defuser transponders can be plugged into the Platinum100 via a single interface. K40 Laser Defusers are available directly from the manufacturer. If installed, the defusers can be configured to one of three operational settings: Constant Transmit, Pulse Transmit, or Receive Only.

Advanced Filter Settings: The K40 Platinum100 offers the following Filter Modes:

Highway: This default setting detects all types of North American approved police radar (X, K, Ka) at full sensitivity. This is recommended for highway travel, or for areas in which you are unfamiliar with the types of radar used.
City: The City mode reduces the range and sensitivity of X-band, K-band, and Ka-bands. This can be used in urban areas where there are minimal non-police radar signals.
Filter: In this mode, X-band detection is eliminated and K and Ka band are reduced even further. This is best for congested traffic areas where there is a high concentration of non-police radar signals.
Auto: The range and sensitivity on all radar bands are based on the vehicle's speed. At lower speeds, the sensitivity is relatively low. As your speed increases, the range and sensitivity of the radar detection is raised:
- Up to 45 mph: Filter setting sensitivity is selected.
- 45 to 55mph: the detector chooses City mode.
- 56 mph and over: the Highway setting is selected.

K-Band / Ka-Band Filtering: The K40 Platinum100 rejects alerts from modern K-Band radar-based in-vehicle technology. Safety features, such as Lane Departure Warning and Collision Avoidance are filtered out. In addition, non-police radar signals on the Ka-Band, such as other radar detectors and satellite broadcast bands, can be rejected. Ka-Band Filtering can be enabled or disable in the menu.

Traffic Sensor Filter: The Platinum100 will reject alerts caused by traffic flow sensors that can typically be found along some highways. A special K-Band Traffic Sensor Filter can be enabled in the menu when necessary.

OLED Display: The Platinum100 has a bright, multi-color OLED display, with your choice of White, Red, Blue, Amber, or Green display accents. The display is divided into three segments. The left side always displays your speed in mph or kph. The right side can display a compass heading, vehicle voltage, or All-Threat (showing all detected radar and signal strength). The center display shows an optional clock or is blank until an alert is detected. The Alert Display can be a 5-Bar Alert showing 5 available bars indicating signal strength across the center and right side sections. The detected Band appears to the left of the bar graph. An alternate display is the 3-Bar Alert with 3 available signal-strength bars and the detected band in the center section only.

Dim Settings: The OLED display offers six brightness options: Day (brightest), Dusk (medium), Night (dimmest), Auto (adjusts automatically), Stealth (dark with a single LED dot), and Off (no display). You can manually adjust the display brightness using the Dim/Menu button on the top panel.

Audible Alerts: The Platinum100 features both configurable Voice and Tone Alerts. The default setting is "Voice On" and a voice announces which radar band was detected, or says "Laser" if Laser is detected. When you make changes to the menu settings, a confirmation of those changes are announced. You can choose a male or female voice for audio alerts. If you choose "Voice Off", the unit will alert you with distinctive tones when radar or laser is detected. You can adjust the volume up or down manual through the top-mounted buttons. If Auto Volume is on, the unit automatically reduces the volume every 3 seconds during an alert.

RDD Guard: The K40 Platinum100 features RDD Guard to give you protection from Radar Detector Detectors (RDDs).

GPS: The Platinum100 has a built-in SiRFstar III GPS receiver that can use signals from overhead global positioning satellites to pinpoint the location of your vehicle. When available satellites are located, the unit announces "GPS Connected." GPS is also used to monitor your vehicle's speed for such features as Speed Alert, Quiet Ride, and Auto Filter. The detector lets you mark specific locations to Alert you or to Mute sources of false alerts:

Mark to Alert: You can mark specific GPS locations such as speed traps, school zones, and red light cameras, so you'll receive an alert whenever you enter that geographical area. Each time you mark a location, you add to a growing database of important locations, which are stored in the detector's memory.
Mark to Mute: Like Mark to Alert above, you can mark specific GPS locations where you receive non-police radar alerts. This eliminates annoying false alerts from automatic doors and security systems.

Quiet Ride: The Quiet Ride feature will silent all audible alerts until you exceed a selected minimum speed. You can set the minimum speed between 5 and 75 mph in 5 mph increments (or 10-120 kph in 10 kph increments). Typically this feature is used on long road trips, and where you only want to be alerted to radar if you exceed a set speed limit.

Speed Monitor: The Speed Monitor feature will provide audible and visual alerts whenever you exceed a pre-selected speed. You can set the Speed Monitor to any speed between 40 and 100 mph, in 5 mph increments (or 60-160 kph in 10 kph increments). Speed Monitor overrides the Quiet Ride feature.

Clock Display: The Platinum100 offers a clock in the center section of the display. The time is set by the internal GPS receiver. You can set the time zone display according to Greenwich Mean Time (GMT). The default setting is GMT - 5.00 (Eastern Standard). There is a setting for enabling Daylight Saving Time (DST) for those states who observe it.

Wake-up Sequence: When you power up the Platinum100, the device will start its Wake-up Sequence. There are three options for the sequence:

Wake-up Long (default): The unit will announce and display "K40 Scan, Active" and sound alerts for X, K, Ka-Band, and Laser.
Wake-up Short: The unit displays the same sequence as above, but only emits three beeps.
Wake-up Silent: The unit displays the default Wake-up Sequence in silence.

Remote Control: The Platinum100 comes with a wireless remote control that lets you turn on/off many of the system's features. In addition to power, volume up/down, and mute, the remote includes buttons for Dim, Menu, Mark to Mute (MM), Mark to Alert (MA), Quiet Ride, and City/Highway modes. The remote comes with a visor clip and self-adhesive hook-and-loop fasteners so you can keep it hidden away when not in use. It is powered by a CR2032 coin cell battery (included). Dimensions: 1.433" wide, 3.069" long, 0.467" high; Weight: 0.8 ounces.

Firmware Updates: The Platinum100's firmware can be updated by connecting the unit to your computer via a Mini-USB cable (not included). The current firmware version can be displayed through a menu option.

K40's Ticket-Free Guarantee: K40 Electronics offers a Ticket-Free Guarantee for the first year of product ownership. During that first year, the company will pay in full for all radar speeding tickets incurred while the detector is operating and used properly. The guarantee is not valid for tickets written in school or construction zones, or if incurred with a DUI or DWI violation. Tickets received outside of the U.S. and Canada are not covered by the guarantee. Product registration is required for coverage.

K40 Radar Detector